Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! (http://ratrodsrule.com/forum/index.php)
-   Welding/Metalworking... Talk & Q&A (http://ratrodsrule.com/forum/forumdisplay.php?f=25)
-   -   My missguided metal work (the side work) (http://ratrodsrule.com/forum/showthread.php?t=22683)

GJunktionMike 01-11-2012 08:53 PM

My missguided metal work (the side work)
 
6 Attachment(s)
Well my youngest brother asked if I could fix and shave his doors to his 50's studie pickup. This brings a new meaning to shaving doors, he doesn't want windows or the trim or the channel for the window.

Bonehead 01-11-2012 10:36 PM

Looks good. cleaned up real nice.

GJunktionMike 01-12-2012 11:03 PM

6 Attachment(s)
Quote:

Originally Posted by Bonehead (Post 259633)
Looks good. cleaned up real nice.

Thank BH it was alot of tacking and hammering.

I always foreget before pics. Door was cratered in 1" next to the jam. Had to hammer the rounded peices for the bottom of the door.

GJunktionMike 02-26-2012 12:23 AM

4 Attachment(s)
A trim saw and 80 tooth blade works wonders

GJunktionMike 03-23-2012 09:48 PM

Mocked up the next rod
 
3 Attachment(s)
I know what your thinking, I need a bigger motor :D Just fun'n. Well I'm done with the old tire under the motor so I built me a stand.

Old Iron 03-24-2012 06:58 AM

1 Attachment(s)
Mike the engine on the wagon may work if you use this tranny :D

GJunktionMike 03-24-2012 09:49 AM

Dont tempt me :D

gold03 03-24-2012 11:00 AM

I thought the V-Drive from a boat would make a cool project with the engine in the rear, and backwards. Sure make people stand and scratch their heads trying to figure it out.

gold03

GJunktionMike 03-24-2012 12:04 PM

I have seen the V-drive done before. At our local 1/4" strip years ago a local here had a chevy van and could run the 1/4 in a wheel stand. I have also seen a few in hot rod mags.

Gastrick 03-24-2012 01:43 PM

Nice work Mike. I like to watch this type of thing going on.


All times are GMT -5. The time now is 02:29 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Rat Rods Rule Inc.