Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Go Back   Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! > Builds!

Builds! Post your project here... show us what you're up to! Please Note: This section is for "Builds" ONLY!

Reply
 
Thread Tools Display Modes
  #1  
Old 01-20-2020, 12:31 PM
joedoh joedoh is offline
Rusty Rat Rodder
 
Join Date: Oct 2015
Location: doodah ks
Posts: 1,432
Default "Bickle" 1948 3100

so enough time has elapsed, I am bored again.

named Bickle because the fenders are yellow, they are the ones I picked up in omaha last year.



and the cab/hood/bed/running boards will be black, giving the appearance of a taxi I think. the most famous taxi driver I know (besides Jim) is Travis Bickle. here is the black 6400 cab I bought last year



and yesterday I picked it up.



it is really clean, has a kink in the drivers cowl that looks like as much fun as a pinapple enema to fix, but there is no other repairs needed at all.






it has a weird radio setup with a head in the dash and looks like a amp/speaker on the firewall. also has a fan, these are common in grain trucks that spend hours creeping at 2mph beside combines to catch the output.





more in next post
Attached Images
File Type: jpg IMG_4401.jpg (170.5 KB, 157 views)
File Type: jpg IMG_3222.jpg (187.0 KB, 155 views)
File Type: jpg IMG_6019.jpg (153.3 KB, 156 views)
File Type: jpg 60116952470__0A66B344-D100-4FC8-9713-689E08B57F60.JPG.jpg (128.9 KB, 153 views)
File Type: jpg 60116953775__EFB97FDC-DA22-43CD-836B-7DB769F5C771.JPG.jpg (99.1 KB, 153 views)
File Type: jpg 60116954832__B93A1FE8-D1FC-469D-A0B5-24B43BA05C8B.JPG.jpg (135.8 KB, 157 views)
File Type: jpg 60116956539__FCB8E217-632D-4100-AEBE-9F0D44C830A1.JPG.jpg (132.0 KB, 156 views)
File Type: jpg IMG_6027 2.jpg (102.7 KB, 153 views)
File Type: jpg IMG_6028.jpg (75.3 KB, 153 views)
File Type: jpg 60117569482__E6E1C034-4DAB-4764-A171-22A5148279C0.jpg (91.2 KB, 11 views)
Reply With Quote
  #2  
Old 01-20-2020, 12:48 PM
joedoh joedoh is offline
Rusty Rat Rodder
 
Join Date: Oct 2015
Location: doodah ks
Posts: 1,432
Default

so that is the body sorted, now I need an s10 donor. I like to use the 98+ stuff so it haas all the electronic upgrades, I especially like the 03s, that was the only year the 2wd s10 got the LU3 4.3 motor with roller rockers and MPFI. so when I saw this ad on marketplace for a body beat but 115k mile sonoma, I called.



when I got there it had two flats and was stuck in the mud. he was frantically trying to start it, but the engine turned over poorly like it had water in a cylinder. he assured me it ran when parked a couple years before, but it wouldnt turn over well even with a jump and I told him my donors had to drive home and even if we started it I didnt have spares for the tires that were leaking like sieves when aired up, and went to find something else. but a month later I picked up two smoothies with tires, and that gmc was still popping up in my feed, so I took it as a sign.



I called and said give me a "today only with a tow truck get it out of my yard price" and he understood. for $450 I figured I could replace the motor and trans if needed, so I towed it home.





turns out he was telling the truth, the battery cable was corroded from acid, and the engine spun furiously after that. maybe the fuel pump was out, wait, nope. its completely out of gas. a couple gallons and it is a smooth runner, runs and drives really really well. Its a ZQ8 truck so it has a larger front and a rear sway bar, and is factory lowered 2.5".

I popped on the front tires and at that moment my friend called with some steel rears, so I popped used tires on those and mounted them up.



I terrorized the neighborhood doing some shakedown, seems to need tie rods but everything else is good, even the ac works.

I needed to clean up the shop to get the parts out for this build, but I have been in the (bad) habit of just opening the garage door and throwing the parts in wherever there is room.



so I took an afternoon and organized.








more in another post
Attached Images
File Type: jpg Screen Shot 2020-01-08 at 9.14.02 AM.jpg (120.5 KB, 147 views)
File Type: jpg IMG_5750.JPG.jpg (160.4 KB, 146 views)
File Type: jpg IMG_5756.jpg (155.8 KB, 148 views)
File Type: jpg photo0.jpg (131.9 KB, 148 views)
File Type: jpg 59951739619__1FB16EA0-3D4E-4BE9-9C4E-91D9F7DBA2B7.JPG.jpg (195.3 KB, 149 views)
File Type: jpg IMG_5882.jpg (119.4 KB, 148 views)
File Type: jpg IMG_5883.jpg (133.3 KB, 147 views)
File Type: jpg IMG_5955.jpg (104.3 KB, 145 views)
File Type: jpg IMG_5952.jpg (132.1 KB, 146 views)
File Type: jpg IMG_5881.jpg (102.1 KB, 150 views)
Reply With Quote
  #3  
Old 01-20-2020, 01:12 PM
joedoh joedoh is offline
Rusty Rat Rodder
 
Join Date: Oct 2015
Location: doodah ks
Posts: 1,432
Default

"but wait" I can hear you saying, "what is that truck with the fenders in the last pictures?"

well eagle eye, a couple months ago I had a painted gmc grille for sale for $50. a nice guy called from oklahoma and asked if I would ship. even though it was oklahoma it was still twice the price of the grille, nevermind box and packing. but it was a nice day, and I was bored, so I proffered a suggestion, how about you drive north and I drive south and we meet somewhere? it would save him about 3 hours with the turn, and he quickly accepted.

we met up and since neither of us was anxious to just hop back in the truck and drive home, chatted a bit. he was surprised at all my fun builds and asked why I didnt keep one? I told him I was holding out for a very specific truck, a 55-56 big back glass truck maybe with a 58-59 fleetside bed. he smiled and said "like this?" and showed me a reasonably clean 56 BBG and a fleet apache bed. we made a deal, he gave a great price probably because I was willing to drive a $50 grille 3 hours (total profit minus gas and lunch: $12) and last weekend I drove to tulsa with a car trailer.



you can see the bed on the flatbed of the truck.

I will do another S10 truck this year besides Bickle, and maybe around Tgiving start on the 56. for now its just tucked away.



and being the kind of guy I am, I didnt want to "waste" a trip to another city,. so I browsed the classifieds and found these in tulsa, old stockton wheel reverse wheels with clip cap centers, widened to 15x8.



I will need to order a matching pair, which will cost a bit to have made, but the sum price of 4 will almost be half price.

what else is going on? glad you asked. my friend called one day, he has spotted an ad for a 91 4x4 chevy and told me "look in the background", I did and there appeared to be a 5 window cab. I called and asked if he wanted to part with it and he said "look, if you want to buy parts, you have to buy it all". I didnt know what "all" meant but his price was fair for the cab, so I went. there were FIVE doors, TWO front clips, running boards, a visor, and just buckets of stuff!





when I was done loading and strapping he asked if I had any interest in the 91 4x4, I laughed and said "maybe the seat" so he sold me that too!



my tool collection has been growing and I am busting out of my roll cart. I stopped by The Yard (local surplus store) and they had a nice snap on bottom box for less than half the box stores wanted for a husky. of course I dont sneeze at a good deal but still haggled another $20 off!



I also ordered a new plasma cutter, it cuts really well and I got it with a small cnc table that I cant wait to put together. Bickle will have cad designed and cnc cut parts!



I also spied some nice looking 20s with new tires on marketplace, I thought they might look nice on Bickle so I bought them. I tried the fit on nicks 54 and yes, I think they will look great!



the guy with the wheels also had a longbed s10 in his back yard, he said he was using the engine and trans but everything else was up for grabs. I think I will use the 5 window cab and make that mini coe I have been thinking about for a couple years. I wish I had driven to the PNW and bought that bullet riddled COE hood now!

so that should catch you up, I am working on cleaning my home shop today but might get some dismantling done on the sonoma.
Attached Images
File Type: jpg IMG_5941.jpg (117.0 KB, 145 views)
File Type: jpg IMG_1814-1.jpg (86.3 KB, 141 views)
File Type: jpg IMG_1811-1.jpg (133.5 KB, 141 views)
File Type: jpg IMG_5834.JPG-3.jpg (143.0 KB, 141 views)
File Type: jpg IMG_5835.JPG-3.jpg (131.9 KB, 144 views)
File Type: jpg IMG_5843.JPG.jpg (92.9 KB, 138 views)
File Type: jpg IMG_6026.jpg (173.1 KB, 140 views)
File Type: jpg IMG_6007.jpg (101.2 KB, 141 views)
File Type: jpg IMG_5770.JPG.jpg (111.6 KB, 144 views)
File Type: jpg 60037446667__B7E6A862-A431-4BA5-A434-BD6A40A934F4.jpg (87.1 KB, 139 views)
Reply With Quote
  #4  
Old 01-20-2020, 01:14 PM
MercuryMac's Avatar
MercuryMac MercuryMac is offline
Builder Junky!
 
Join Date: Jan 2013
Location: Northern Alberta, Canada.
Posts: 3,097
Default

You are off to a real good start.
You've also proved that you cannot make a hotrod in a one car garage.
Reply With Quote
  #5  
Old 01-20-2020, 03:16 PM
forbigpicture's Avatar
forbigpicture forbigpicture is offline
Please stand by.......
 
Join Date: Mar 2014
Location: West by God Virginia
Posts: 5,645
Default

WOW...going to have to take a break after all that.... I'm worn out now

can't wait to see what's next...
__________________
Learned a lot from my mistakes....think I'll make a few more....
Reply With Quote
  #6  
Old 01-20-2020, 03:27 PM
skull's Avatar
skull skull is offline
''SARCASM: just one of his many talents.''
 
Join Date: Apr 2009
Location: wet side, washington state
Posts: 5,872
Thumbs up

that old s'cool radio is groovy daddy 0

Later
__________________
my opinion only, valid where prohibited, for official abuse only.

1928 maxwell hybrid build/drag car
http://ratrodsrule.com/forum/showthread.php?t=37455

1948 dodge truck in deceased son's memory.
http://www.ratrodsrule.com/forum/sho...odge+truck+son

1930 2dr mopar.
http://ratrodsrule.com/forum/showthr...ht=30+mopar+dr
Reply With Quote
  #7  
Old 01-20-2020, 04:31 PM
DozerII's Avatar
DozerII DozerII is offline
Rusty Rat Rodder
 
Join Date: Sep 2015
Location: Saskatchewan Can.
Posts: 3,270
Default

Holy Joe I'm outta breath just from your shopping trips. I will tag a long as usual.
__________________
Glen
My 29 Essex Build http://ratrodsrule.com/forum/showthread.php?t=34026

Don't give up, it's far too much fun once you can drive it.
Reply With Quote
  #8  
Old 01-20-2020, 09:28 PM
kenny c kenny c is offline
Rusty Rat Rodder
 
Join Date: Jan 2012
Location: West Greenwich R.I.
Posts: 3,077
Default

Man have you been busy. Sounds like you got some great deals.
__________________
Tetanus Tornado 49 F6
Reply With Quote
  #9  
Old 01-21-2020, 07:02 AM
BillM's Avatar
BillM BillM is offline
Rusty Rat Rodder
 
Join Date: Nov 2009
Location: Southern Ontario
Posts: 1,204
Default

Wow Joe, my head is spinning from all this info! It's no wonder that the AD parts are scarce up here, you have them all down there! LOL. Thanks for posting, I'll be watching...
Reply With Quote
  #10  
Old 01-21-2020, 11:55 AM
Torchie's Avatar
Torchie Torchie is offline
Rusty Rat Rodder
 
Join Date: Mar 2013
Location: Northern Michigan
Posts: 6,221
Default


Torchie
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:43 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Rat Rods Rule Inc.